Building your own concrete patio saves thousands on labor—you only pay for materials. Use NailIt's free estimator to calculate concrete, gravel, forms, and finishing supplies for your project size. Get an accurate materials budget in minutes.
Estimated DIY materials cost for total materials for typical 12×16 ft patio — you supply the labor. Prices vary by region and brand.
Across the full range this works out to $4.17–$17 per sq ft, depending on material grade and how much waste you plan for.
Here is the arithmetic, so you can redo it with your own numbers: a typical project here is 192 sq ft and runs $800–$3,200 in materials. Divide the middle of that cost range by the middle of the area range ($1,600 ÷ 192 sq ft) and you get $8.33 per sq ft. Measure your own space, multiply, and you have your materials budget.
Materials only — labour is not included. See what a contractor charges below.
A handy DIYer can usually take this on; if it needs permits or systems you are unsure about, get a pro quote first. The pro figure is a rough rule of thumb (labor on jobs like this often runs 1–2.5× the materials) — always get real quotes. It is not a NailIt estimate.
NailIt estimates materials only, so here is the honest version of the labour question rather than a number we cannot stand behind. Installed, this job commonly lands somewhere around $1,600–$11,200 — that is the materials range above with labour applied at the rough 1–2.5× multiplier trades typically work to on jobs like this. It is a sanity check for reading a quote, not a NailIt estimate and not a substitute for a real one.
What actually moves that number: your region and local labour rates, access and prep work, whether a permit and inspection are involved, disposal of the old material, and how much the crew has to work around your schedule. For this project the DIY route is realistic for most homeowners, and the labour saving is the whole point. Always collect three written quotes from licensed, insured contractors and compare what each one includes — how we handle pricing.
Concrete Patio — DIY materials checklist · asknailitai.com
More concrete patio videos on YouTube →
For a 12×16 ft patio at 4 inches deep, you'll need roughly 23.7 cubic yards (or ~714 bags of 60-lb concrete). Adjust based on your dimensions using NailIt's calculator.
Yes—DIY concrete pours are doable for beginners with proper prep. Rent or buy a mixer, prepare a level base, use forms, pour, level, and finish. NailIt estimates all material costs you'll need.
Only materials: concrete, sand, gravel, lumber forms, rebar, tools, sealant, and fasteners. Labor, equipment rental, and permits are separate. NailIt focuses on what you buy.
Free AI breakdown for your exact concrete patio — materials, costs, tools, steps, and where to buy them.
⚡ Start your free estimate →Estimates are AI-generated 2026 US DIY materials costs (labor not included); actual prices vary by region, brand, and size. · All 141 projects