Fiber cement siding is a durable, low-maintenance choice for DIY home exteriors. This guide breaks down the materials you'll buy and install yourself—no contractor labor included. Use NailIt to estimate your total materials investment for your project size.
Estimated DIY materials cost for total materials for typical 1,200 sq ft home — you supply the labor. Prices vary by region and brand.
Across the full range this works out to $2.67–$7.08 per sq ft, depending on material grade and how much waste you plan for.
Here is the arithmetic, so you can redo it with your own numbers: a typical project here is 1200 sq ft and runs $3,200–$8,500 in materials. Divide the middle of that cost range by the middle of the area range ($5,500 ÷ 1200 sq ft) and you get $4.58 per sq ft. Measure your own space, multiply, and you have your materials budget.
Materials only — labour is not included. See what a contractor charges below.
A handy DIYer can usually take this on; if it needs permits or systems you are unsure about, get a pro quote first. The pro figure is a rough rule of thumb (labor on jobs like this often runs 1–2.5× the materials) — always get real quotes. It is not a NailIt estimate.
NailIt estimates materials only, so here is the honest version of the labour question rather than a number we cannot stand behind. Installed, this job commonly lands somewhere around $6,400–$29,750 — that is the materials range above with labour applied at the rough 1–2.5× multiplier trades typically work to on jobs like this. It is a sanity check for reading a quote, not a NailIt estimate and not a substitute for a real one.
What actually moves that number: your region and local labour rates, access and prep work, whether a permit and inspection are involved, disposal of the old material, and how much the crew has to work around your schedule. For this project most homeowners are better off getting quotes — see the gauge above. Always collect three written quotes from licensed, insured contractors and compare what each one includes — how we handle pricing.
Fiber Cement Siding — DIY materials checklist · asknailitai.com
More fiber cement siding videos on YouTube →
No. NailIt estimates MATERIALS ONLY. Since you're doing the work yourself, labor is free—you only pay for the siding planks, fasteners, underlayment, trim, and tools.
You'll need a circular saw or miter saw with fiber cement blades, drill/driver, nail gun (or hammer), level, and tape measure. Blade costs are included in materials; tool rental is extra if you don't own them.
Yes, but it's recommended to remove old siding first for a cleaner install and better moisture control. Removal costs and new underlayment are included in the materials estimate.
Free AI breakdown for your exact fiber cement siding — materials, costs, tools, steps, and where to buy them.
⚡ Start your free estimate →Estimates are AI-generated 2026 US DIY materials costs (labor not included); actual prices vary by region, brand, and size. · All 141 projects