Installing a chain link fence yourself saves thousands in labor costs. NailIt helps you estimate the exact materials you'll need—from fabric and posts to concrete and hardware. Get a fast, free breakdown of everything you'll buy for your DIY project.
Estimated DIY materials cost for total materials for 100 linear feet — you supply the labor. Prices vary by region and brand.
Across the full range this works out to $8.00–$24 per linear ft, depending on material grade and how much waste you plan for.
Here is the arithmetic, so you can redo it with your own numbers: a typical project here is 100 linear ft and runs $800–$2,400 in materials. Divide the middle of that cost range by the middle of the area range ($1,500 ÷ 100 linear ft) and you get $15 per linear ft. Measure your own space, multiply, and you have your materials budget.
Materials only — labour is not included. See what a contractor charges below.
A handy DIYer can usually take this on; if it needs permits or systems you are unsure about, get a pro quote first. The pro figure is a rough rule of thumb (labor on jobs like this often runs 1–2.5× the materials) — always get real quotes. It is not a NailIt estimate.
NailIt estimates materials only, so here is the honest version of the labour question rather than a number we cannot stand behind. Installed, this job commonly lands somewhere around $1,600–$8,400 — that is the materials range above with labour applied at the rough 1–2.5× multiplier trades typically work to on jobs like this. It is a sanity check for reading a quote, not a NailIt estimate and not a substitute for a real one.
What actually moves that number: your region and local labour rates, access and prep work, whether a permit and inspection are involved, disposal of the old material, and how much the crew has to work around your schedule. For this project the DIY route is realistic for most homeowners, and the labour saving is the whole point. Always collect three written quotes from licensed, insured contractors and compare what each one includes — how we handle pricing.
Chain Link Fence Installation — DIY materials checklist · asknailitai.com
More chain link fence installation videos on YouTube →
Basic tools like a post-hole digger, level, wrench set, and tape measure are usually enough. A power auger ($40–80 rental) speeds up digging. NailIt estimates assume you own or rent standard DIY tools.
Material cost typically ranges $3–$6 per linear foot for 6-ft height, depending on gauge and quality. Posts, concrete, and hardware add another $5–$8 per foot. Your total usually lands $8–$24 per linear foot.
Yes, but you'll need more concrete and possibly shorter top-rail sections. Uneven terrain may increase material costs by 10–20%. NailIt lets you adjust for site conditions to get an accurate estimate.
Free AI breakdown for your exact chain link fence installation — materials, costs, tools, steps, and where to buy them.
⚡ Start your free estimate →Estimates are AI-generated 2026 US DIY materials costs (labor not included); actual prices vary by region, brand, and size. · All 141 projects