DIY Washer Dryer Installation: Materials Cost

Installing a washer and dryer yourself saves thousands in labor costs. NailIt helps you estimate the materials you'll need—from hoses and connectors to venting and brackets. Plan your budget and get started.

Typical DIY cost$150 – $400
Time2–4 hours
DifficultyIntermediate
Cost typeMaterials only
⚡ Start your free AI estimate →
Low$150
Average$275
High$400

Estimated DIY materials cost for total materials for one washer and dryer installation — you supply the labor. Prices vary by region and brand.

DIY vs. hiring a pro

DIYPRO45
DIY or contractor?Skilled DIYTypical for washer dryer installation. Your own scope, local codes, and permits can move this either way — run a free estimate for a score on your exact project.
Do it yourself$150 – $400Materials only — you supply the labor
Hire a pro (rough est.)$300 – $1,400Materials + labor, installed

A handy DIYer can usually take this on; if it needs permits or systems you are unsure about, get a pro quote first. The pro figure is a rough rule of thumb (labor on jobs like this often runs 1–2.5× the materials) — always get real quotes. It is not a NailIt estimate.

What a contractor charges for washer dryer installation

NailIt estimates materials only, so here is the honest version of the labour question rather than a number we cannot stand behind. Installed, this job commonly lands somewhere around $300–$1,400 — that is the materials range above with labour applied at the rough 1–2.5× multiplier trades typically work to on jobs like this. It is a sanity check for reading a quote, not a NailIt estimate and not a substitute for a real one.

What actually moves that number: your region and local labour rates, access and prep work, whether a permit and inspection are involved, disposal of the old material, and how much the crew has to work around your schedule. For this project the DIY route is realistic for most homeowners, and the labour saving is the whole point. Always collect three written quotes from licensed, insured contractors and compare what each one includes — how we handle pricing.

Shop materials on Amazon

4 Ft Washing Machine Hoses, 2 Packs Premium Stainless Steel Washer Hoses Burst Proof, Hot and Cold Striped Water Supply Hoses with 3/4'' Standard Interface fit for ALL Washer$12.204FT Premium Steam Dryer Hose Installation Kit-Include 4 Ft 90 Degree Elbow Stainless Steel Hose,1 Foot Inlet Adapter Hose and Y Connector-Fit for All Steam Dryers by AMI PARTS$16.59Steam Dryer Hose Installation Kit 6FT by AMI PARTS-Include 6 Ft 90 Degree Elbow Stainless Steel Hose-Fit for All Steam Dryers-1ft Inlet Adapter And Y Connector-Burst Proof Steam Dryer Water Line$18.59

More on Amazon →

DIY how-to videos

How To Hookup a Washer and Dryer - Complete GuideThe BeefMasterHow to Install a Washing Machine | The Home DepotThe Home DepotDisconnect and Install a Washer and DryerChickFix USA

More washer dryer installation videos on YouTube →

Frequently asked questions

Do I need a contractor to install a washer and dryer?

No. With NailIt, you can DIY the installation yourself and buy only the materials you need—hoses, venting, brackets, and connectors. Just follow manufacturer instructions and local codes.

What materials do I need for washer dryer installation?

Typically: inlet hoses, drain hose, dryer vent ductwork, vibration pads, electrical cord (if required), brackets, fasteners, and sealant. NailIt helps you itemize each.

How much do washer dryer installation materials cost in 2026?

Materials typically range $150–$400 depending on hose length, vent type, and outlet distance. Use NailIt to get a precise estimate for your setup.

Related appliances projects

Get your personalized estimate in seconds

Free AI breakdown for your exact washer dryer installation — materials, costs, tools, steps, and where to buy them.

⚡ Start your free estimate →

Estimates are AI-generated 2026 US DIY materials costs (labor not included); actual prices vary by region, brand, and size. · All 141 projects